Xerox document centre285 series, Руководство пользователя

Страница: 126 / 209

5.3 Common Menu Items
114
Mode
M
e
nu and Common Menu
5
NetWare
(con’t...) Transpt Protocol
Sets the protocol of the transport layer used by NetWare. The candidate
values are:
•
TCP/IP, IPX/SPX (default)
• TCP/IP
• IPX/SPX
To use TCP/IP, you will need to set the IP address on both the computer and printer.
Print Mode
Sets the printer language. The candidate values are:
•
Auto (default)
The language to be used will be determined automatically
• PCL
•
PS (available only when PostScript Kit is installed)
When the value is set to Auto, and if the printer language used cannot be found by the
automatic printer language detection feature or it is not the selected printer language,
the data may be erased.
PJL
Sets whether to enable the PJL commands sent from the computer. The
candidate values are:
• Enable (default)
•
Disable
No. of Search
Sets the number of times of searching the file server. The candidate values
are:
•
No Limit (default)
• 1-100
When you are pressing or to change the candidate value, press and hold
on to the button to run the displays continuously. When both of these buttons are
pressed together, the value will be reset to the factory setting.
TBCP Filter
Sets whether to enable the TBCP filter when processing PostScript data.
Available only when PostScript Kit is installed. The candidate values are:
• Enable
• Disable (default)
Menu item Explanation