Xerox document centre285 series, Руководство пользователя

Страница: 95 / 209

4.3 Configuring the Printer Drivers
83
Installing/Configuring the P
rinter
D
ri
v
ers
4
Output Options
The Output Options tab has some advanced features for sending a print job. Notice that there
are image displays of Collated Settings and Finishing which will change according to the
selections made. You can either click on these displays or choose from the drop-down list (for
Stapling) to make selections.
Job Offset Settings
This feature provides a means of identifying one print job from another in the printer output
tray by outputting jobs in an in-out manner.
Job Offset
Options include:
● None (default)
No job offset.
● Offset Per Job
Offsets each print job.
● Offset Per Set
Offsets each set within a print job. This will only apply when two or more sets have
been selected.
The two job offset options are available only if either one of the following conditions is
met:
- Offset Catch Tray has been selected on the Printer tab and Center Output Tray for
Output Destination on the Paper/Output tab; or
- Finisher has been selected for Paper Output Options on the Printer tab and
Finisher Tray Upper for Output Destination on the Paper/Output tab.
Collated Settings
Specify how you want your document to be arranged.
Collated (default: on)
Check on the check box to collate or uncollate your documents. Enabled only if all of the
following conditions are met:
- Hard Disk has been selected on the Printer tab;
- more than 1 is selected for Copies on the Paper/Output tab.
Windows 95/Windows 98/Windows Me Windows NT 4.0/Windows 2000