Xerox document centre285 series, Руководство пользователя

Страница: 48 / 209

S
e
tting Up
36
2
2.7
Other Printer Settings
If necessary, use the printer control panel to define settings for the following items.
However, it is usually not necessary to change the factory settings of these items for normal use.
"5.3 Common Menu Items" for details on each item and the way of setting
When using TCP/IP (LPD)
■
Network/Port > LPD
● Print Mode (factory setting: Auto)
● PJL (factory setting: Enable)
●
Connect Time-Out (factory setting: 16 Secs)
● TBCP Filter (factory setting: Disable)
● IP Filter (factory setting: Off)
■
Allocate Memory > Buffer Size
●
LPD Spool (factory setting: Off/256K)
When using SMB
■
Network/Port > SMB
●
Print Mode (factory setting: Auto)
●
PJL (factory setting: Enable)
● TBCP Filter (factory setting: Disable)
■
Allocate Memory > Buffer Size
●
SMB Spool (factory setting: Off/256K)
Set the following items by using CentreWare Internet Services or changing the "config.txt" file
of the printer via a Windows computer:
●
Workgroup (factory setting: WORKGROUP)
● Host Name (factory setting: FX-xxxxxx)
[where xxxxxx is the last six digits of the Ethernet address of the printer]
● Administrator Name (factory setting: admin)
● Administrator Password (factory setting: admin)
● Maximum Sessions (factory setting: 5)
●
TBCP Filter (factory setting: Disable)
● Auto Driver Download (factory setting: Enable)
● Unicode Support (factory setting: Disable)
● Auto Master Mode (factory setting: On)
●
Encrypt Password (factory setting: On)
●
"5.5 CentreWare Internet Services" for details on operating CentreWare Internet Services
●
Network Print Environment User Guide (Network.pdf) in the PCL Driver/Network Utility (Windows

)
CD-ROM for details on "config.txt" file