Xerox DocuColor 40, Руководство по печати

Страница: 72 / 78

C
C-4 Troubleshooting
Problems with print quality
If this happens: Try this:
Print settings for your job
output do not match the
settings you gave. • Make sure that you did not override the setting for the job in another place.
For information about options and overrides, see Appendix A "Print Options."
You get poor printing results. • Does your application require one of DocuColor 40 CP printer description files?
If you’re printing from an application such as Adobe Separator or PageMaker,
MacroMedia FreeHand, or QuarkXPress, make sure that the DocuColor 40 CP printer
description file is installed correctly. For information about installing these files, see
Getting Started.
• Use a different Copier Mode option.
For DocuColor 40 CP Color Server systems, the default Copier Mode setting is Text
Enhancement. Try changing the setting to Photo and see if the results improve.
• Make sure the system has been calibrated.
Separations do not combine
properly. • Make sure that the file was initially created as separations.
• If you are printing separations or a DCS format file, set the Combine Separations print
option to On.
With Combine Separations On, all four colors will be printed on a single page; with
Combine Separations Off, four grayscale pages will print to simulate four single-color
plates.
The registration or colors of
an image are not what you
expected. • Ask the operator to print a test page or make a test copy with the copier.
The problem may be with the copier. If your test page or copy show that the copier is
working properly, correct the problem within your application software. If the test page
or copy are wrong, your copier may need to be calibrated or adjusted in some other
way.
Your printed file appears too
dark. • Adjust the Brightness option.
You can use the Brightness option when printing from an application or from
Downloader to lighten your image whenever you print a PostScript or Encapsulated
PostScript (EPS) file.
Color output is incorrect. • Check with the operator or administrator about the current calibration information.
The copier may need to be recalibrated because it has been too long since it was
calibrated or because it is using a different target.