15
1.
Select [Authentication/Security Settings] on the [Tools] screen..
2.
Select [Overwrite Hard Disk].
3.
Select [Scheduled Image Overwrite].
4.
On the [Scheduled Image Overwrite] screen, Select [Daily] or [Weekly] or [Monthly].
5.
Set [Day], [Hour], [minutes],
6.
Select [Save].
Set Data Encryption
1.
Select [System Settings] on the [Tools] screen.
2.
Select [Common Service Settings].
3.
Select [Other Settings].
4.
On the [Other Settings] screen, select [Data Encryption].
5.
Select [Change Settings].
6.
Select [On].
7.
Select [New Encryption Key].
8.
Enter a New Encryption Key of 12 characters using the keyboard displayed, and then select [Save].
9.
Select [Re-enter the Encryption Key]
10.
Enter the same passcode, and then select [Save].
11.
Select [Save].
12.
Select [Yes] to make the change.
13.
Select [Yes] to Reboot.
Set Authentication
1.
Select [Authentication/Security Settings] on the [Tools] screen.
2.
Select [Authentication].
3.
Select [Login Type].
4.
On the [Login Type] screen, select [Login to Local Accounts] or [Login to Remote Accounts].
5.
Select [Save].
When [Login to Remote Accounts] is selected in step 4, proceed to steps 6 to 12.
6.
Select [System Settings] on the [Tools] screen.
7.
Select [Connectivity & Network Setup].
8.
Select [Remote Authentication/Directory Service].
9.
Select [Authentication System Setup].
10.
Select [Authentication System].
11.
Select [Change Settings].
12.
On the [Authentication System] screen, Select [LDAP] or [Kerberos].
13.
Select [Save].
14.
To exit the [Remote Authentication/Directory Service] screen, select [Close].
Set Access Control