Xerox Color 800 Скачать руководство пользователя страница 62

Страница: 62 / 78

Fold Adjustment information

Note

The Adjust Fold option is available with the Booklet Maker Finisher (Bi-/Single Fold) or
when the finisher has the optional C/Z Folder attached to it (applicable for the Standard
Finisher, Booklet Maker Finisher, or Standard Finisher Plus).

• Bi-Fold adjustment: A Bi-Fold has one fold which creates two panels to the output.

Bi-Fold (Single Fold) output is delivered to the Booklet Output Tray. The following
illustration reflects a Bi-Fold Single Sheet:

Multiple sheets or multiple sheets with staples can also be added to a Bi-Fold
adjustment as depicted in the following illustrations:

• C-Fold: A C-Fold has two folds which creates a three-panel output. C-Fold output is

delivered to the C/Z Fold Output Tray. The following illustration reflects a C-Fold
adjustment:

• Z-Fold: A Z-Fold has two folds that are folded in opposite directions, resulting in a

type of fan fold. Z-Fold output is delivered to the C/Z Fold Output Tray. The following
illustration reflects a Z-Fold adjustment:

Xerox

Color 800i/1000i Presses Xerox

Color 800/1000 Presses

6-12

System Administration Guide

Profiles

Содержание Color 800














































































Результаты поиска

Содержание Color 800

Отзывы:

Бренды по названию

Популярные бренды

Xerox Color 800, Руководство системного администратора

Результаты поиска

Содержание Color 800

Отзывы:

Бренды по названию

Популярные бренды