manualshive.com logo in svg

Xerox Color 800, Руководство системного администратора

Поделиться
Скачать
Xerox Color 800 Скачать руководство пользователя страница 46

Related Topics:

Logging on as Administrator

Image Quality tab

This feature allows administrators to select the default setting in order to achieve
maximum image quality on the printed output.

The Image Quality feature consists of:

• Priority When Switching Paper Types: Choose from one of two options

-

Image Quality: This selection provides the best image quality possible on the
transparency output but the machine runs at a slower print speed in order to
achieve this high image quality on the output.

-

Productivity: This selection allows the machine to run at the rated press speed
(100 ppm) but the output may not provide the best image quality possible.

• Silver/Gold Printing Higher Fuser Temperature: Select this checkbox to increase the

fusing temperature when printing either of these two colors thereby resulting in more
gloss and better ink adherence.

• Registration Control Setup: Run this option when image quality issues such as

color-to-color, lead edge, and side edge registration problems occur on printed output.
Running this option may fix the registration issues without placing a service call.

• Fuser Belt Refresh: Refer to 

Fuser Refresh Mode

 section for more information on this

option.

• Process Control Setup Color Mode: Select the color mode to identify the combination

of toners to use when processing and printing the job.

Related Topics:

Fuser Refresh Mode

Fuser Refresh Mode

Use the Fuser Belt Refresh option to run a fuser belt refresh when the system is
experiencing image quality defects on the printed output. These defects include scratches,
spots, streaks, or bands. The refresh option engages the fuser refresh roll against the
fuser belt and buffs out any scratches that may be occurring on the lead edge or side
edge of the output.

When enabled, the refresh mode occurs every 10,000 prints and takes approximately
60 minutes. This refresh mode occurs while the machine is idle (not printing).

Xerox

®

 Color 800i/1000i Presses Xerox

®

 Color 800/1000 Presses

5-18

System Administration Guide

System Settings

Содержание Color 800















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды