manualshive.com logo in svg

Xerox Color 800, Руководство системного администратора

Поделиться
Скачать
Xerox Color 800 Скачать руководство пользователя страница 43

• Tray Priority: Sets the priority order for automatic tray selection. If the Auto Tray

Switch Timing feature is enabled and each paper tray contains the same paper size
and weight, the machine feeds paper from the tray set at Priority 1. If there is no
paper in the Priority 1 tray, the Priority 2 tray is automatically selected and so on

Related Topics:

Selecting the Tray Options settings

Selecting the Tray Options settings

Choose the default settings for the following options:
1. Logon as Administrator.
2. Select the System Settings button.
3. Select the Tray Options tab.
4. Select the default setting for:

• Auto Tray Switch Method

• Manual Tray Switching

• Do Not Include for Temporary Stock

5. Select the desired Tray Properties Timeout Window option.
6. Set the default tray priority levels for all attached trays:

a) Click once on the desired tray in the Tray Priority list.
b) Click the up/down arrow button to move the tray up or down in the priority list.
c) Repeat the above two steps for each tray attached to your machine.

Note

You cannot set the same paper tray for more than one priority level at a time.

7. Select OK to save your changes and close the System Settings window.
8. Select Logoff to exit the Administrator mode.

Related Topics:

Logging on as Administrator

5-15

Xerox

®

 Color 800i/1000i Presses Xerox

®

 Color 800/1000 Presses

System Administration Guide

System Settings

Содержание Color 800















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды