Xerox CiPress 325, Информация для помощи клиентам

Страница: 98 / 192

8. Cut out both calibration targets along the dashed cutting lines.
Xerox Calibration Target
The lead edge and header of the test pattern.
1
The dashed cutting line.
2
Note
Cut slightly outside of the dashed lines to ensure an accurate reading by the
spectrophotometer.
9. At the computer used for color calibration, ensure that a folder called DC142 exists.
If the folder does not already exist, create it.
Note
If the DC142 folder did not already exist, the network transfer functionality of
10. Open the X-Rite ColorPort software application.
11. Select the Measure Target tab.
12. From the Target drop-down menu, select CiPressCalibrationTargetRev2.
13. From the Measurement Device drop-down menu, select i1iSis.
14. Select the information (i) icon to the right of the Measurement Device drop-down
menu.
15. Select the UV included option.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
4-68
Customer Help Information
Operating the CiPress™ User Interface