![background image](http://html2.mh-extra.com/html/xerox/cipress-325/cipress-325_customer-help-information_3806560168.webp)
The following components are cleaned as a part of this procedure:
• Idler Rolls
• Web Cleaner
• Ink Drip Trays
• Web Heating Drum
• Print Box Unit (PBU) Backer Rolls
• PBU Docking Points
• PBU Docking Balls
1. If not done already, perform the
2. Open the Right Marking Tower Front Door and the Left Marking Tower Front Door.
3. Move the Right Marking Tower to the left by turning the Tower Control Switch
counterclockwise. Hold the switch until the Tower has traveled as far to the left as
possible.
4. Inspect the two Idler Rolls between the Infeed Module and Right Marking Tower and
clean as required.
5. Open the Web Cleaner.
a) Rotate the red Web Cleaner Knob counterclockwise.
b) Lower the Web Cleaner lower panel.
6.
Clean the static eliminators and Web Cleaner brushes
as required using the Static
Eliminator Cleaning Brush.
7. Inspect and vacuum clean the Web Cleaner brushes as required.
8. Close the Web Cleaner.
a) Rotate the red Web Cleaner Knob clockwise.
b) Raise the Web Cleaner lower panel until it latches.
9. Move the Right Marking Tower to the right by turning the Tower Control Switch
clockwise. Hold the switch until the Tower has traveled as far to the right as possible.
10. Remove the two Ink Drip Trays and dispose of any accumulated ink or dust.
11. Rotate and inspect the entire Idler Roll surface and clean as required.
12. Rotate and inspect the entire Web Heating Drum surface and clean as required.
13. Replace the two Ink Drip Trays.
14. Rotate and inspect the entire surface of each PBU Backer Roll and clean as required.
15. Inspect the front and rear PBU Docking Points and clean as required.
16. Move the Right Marking Tower to the left by turning the Tower Control Switch
counterclockwise. Hold the switch until the Tower has traveled to the service access
position.
17. Pull the Right Marking Tower from the Frame.
a) Turn the Right Marking Tower Retaining thumbscrew counterclockwise until it is
completely loosened.
Xerox
®
CiPress™ 325 / 500 Production Inkjet System
6-4
Customer Help Information
Cleaning
Содержание CiPress 325
