Xerox 770 Скачать руководство пользователя страница 43 | Manualshive

Страница: 43 / 268

Xerox 770 Скачать руководство пользователя страница 43

Image Quality > Image Enhancement

Use the Image Enhancement settings when your scanned image requires more than
the basic image quality. There are two features associated with Image Enhancement:

Background Suppression

This option prevents reproduction of unwanted shading from originals where the
opposite side printing shows through.

Auto Suppression: This option automatically reduces or eliminates any background
on the copies caused by colored paper or newspaper originals.

No Suppression: Select this option when:

• The Darken adjustment does not produce a satisfactory copy from light originals.

• The original has a gray or colored border, such as a certificate.

• You want to bring out fine detail that was lost due to a dark edge when using bound

originals.

Contrast

This option feature controls the difference between the image densities within the
scanned image. Lower contrast settings reproduce more detail in light and dark areas
of the original. Higher contrast settings produce vivid blacks and whites for sharper
text and lines, but produce less detail in pictures. Selections are either Auto or Manual
Correction. Auto Correction automatically chooses the best settings for your job.

Image Quality > Color Effects

This feature produces balanced image tones on your output. Options include:

Lively

This option uses the highest color saturation to produce rich, vivid output colors. The
option increases the color saturation to the most vivid setting in order to produce
fresher images.

Bright

This option produces images that have a brighter appearance and enhanced contrast.

Warm

This option produces a soft image on the output and adding a warm, reddish tint to
low density colors. Use this setting to apply a light pink tone to skin colors and to give
a soft tone to dark, warm colors.

Cool

This option produces a strong, clear blue tone on the output. This setting makes blue
color stronger and makes dark, cold colors clearer.

5-7

Xerox

®

770 Digital Color Press

User Guide

Copy

«
...
41
42
43
44
45
...
»

Содержание 770













































































































































































































































































Отзывы:

Нет отзывов