Xerox 770 Скачать руководство пользователя страница 118

Страница: 118 / 268

2. Open the tray cover and remove jammed paper.

3. Close the tray cover.

4. Reload paper into the tray and resume copying/printing.

Envelope jams in the Bypass tray

Note

Envelopes can be fed only from the Bypass tray. Check that the envelopes are within
specification.

Carefully read and adhere to the following guidelines when using envelopes in the Bypass
Tray:

• Always ensure that the Bypass tray guides are against the edges of the envelopes.

• Check that the attributes of the paper tray are set correctly.

• Some wrinkle is expected on the back of the fed envelope.

Inverter jams (bottom right cover)

1. If a finisher is installed, follow the instructions on the UI for opening the front door

of the finisher and accessing the Inverter bottom right cover.

Xerox

770 Digital Color Press

10-10

User Guide

Problem solving

Содержание 770













































































































































































































































































Результаты поиска

Содержание 770

Отзывы:

Xerox 770, Руководство пользователя, Страница: 118 / 268

Результаты поиска

Содержание 770

Отзывы: