Xerox 770 Скачать руководство пользователя страница 111 | Manualshive

Страница: 111 / 268

Xerox 770 Скачать руководство пользователя страница 111

• Top cover

• Left cover

7. If a document jam cannot be found, slowly raise the document feeder, and if the

document is there, remove it.

8. Close the document feeder.
9. If indicated, raise the feeder tray area and remove the document.

10. Gently return the feeder tray to its original position.
11. After removing the jammed document, follow the instructions to reload the entire

document set into the document feeder.

Note

Ensure that there are not any torn, wrinkled, or folded documents in the document
set. To scan torn, wrinkled or folded documents, use the Document Glass, only.The
already scanned document sheets are automatically skipped and scanning resumes
from the document sheet last scanned prior to the jam.

10-3

Xerox

®

770 Digital Color Press

User Guide

Problem solving

«
...
109
110
111
112
113
...
»

Содержание 770













































































































































































































































































Отзывы:

Нет отзывов