Xerox 770 Скачать руководство пользователя страница 247 | Manualshive

Страница: 247 / 268

Xerox 770 Скачать руководство пользователя страница 247

b) From the Print window, select the desired machine (with the SquareFold Trimmer

Module attached to it), and then select Properties for that machine.

c) Continue to Step 4.

3. From the print server, if applicable, open the Properties of the desired job:

a) Double click on the job (from either the Hold or Printed Jobs queues).
b) From the Properties window, go to the Finishing/Output tab.
c) Continue to the next step.

4. Ensure that the correct output tray is selected (Booklet Maker Tray).
5. If necessary, ensure that the correct Stapling/Finishing/Folding features are selected.
6. Select the desired Square Fold (Book Pressing) option.
7. Select OK to save selections and close any Properties windows.
8. Send the the job to the machine.

Accessing the Square Fold options for copy jobs

1. From the machine UI select Copy and the Output Format tab.
2. Select either Booklet Creation or Folding.
3. From the Booklet Creation screen perform the following:

a) Select On.
b) Select Fold & Staple.
c) From the Booklet Creation - Fold & Staple screen, select either Fold Only or

Fold & Staple.
To access the Square Fold feature, select the Booklet Trimming/Pressing button.

4. From the Folding screen, select Single Fold.

a) Select Fold as a Set.
b) Select Booklet Trimming/Pressing button to access the Square Fold (Book Pressing)

feature.

Trimmer feature

The Trimmer feature can be selected/accessed from your computer print driver, the
machine UI, or from the print server.

Note

The Trimmer feature is available only when your machine is connected to both a finisher
with a booklet maker and the SquareFold Trimmer Module.

Trimmer options

When using the Trimmer options, always consider the following:

• Booklets exiting/leaving the SquareFold Trimmer Module may contain trim

remnants/scraps from the previously trimmed booklet. This is due to static electricity
build-up and is normal. If booklets contain trim remnants/scraps, simply remove and
discard them.

17-7

Xerox

®

770 Digital Color Press

User Guide

SquareFold Trimmer Module

«
...
245
246
247
248
249
...
»

Содержание 770













































































































































































































































































Отзывы:

Нет отзывов