Xerox 770 Скачать руководство пользователя страница 189

Страница: 189 / 268

2. Lift the green handle(s) and/or rotate the green knob and remove all paper in the

entrance area.

3. Close the green handle(s).
4. Close the HCS Front Cover.
5. Press the Unload button on the HCS control panel.

Wait until the Unload indicator lights and then open the HCS front door.

6. Open the front door after the Unload indicator lights.
7. Pull out the stacker cart and gently remove the jammed paper.

8. Push the stacker cart straight into the HCS.
9. Close the front door.

10. If the UI indicates there is a jam in the print engine, follow the instructions on the

screen to remove any paper in the area indicates.

11. Follow the instructions displayed on the UI to resume printing.

15-7

Xerox

770 Digital Color Press

User Guide

High Capacity Stacker (HCS)

Содержание 770













































































































































































































































































Результаты поиска

Содержание 770

Отзывы:

Xerox 770, Руководство пользователя, Страница: 189 / 268

Результаты поиска

Содержание 770

Отзывы: