Xerox 6204 Wide Format Solution, Руководство пользователя

Страница: 69 / 302

Copy
Xerox 6204 Wide Format Solution
User Guide
3-61
Step 3 - Scanning the Original
Follow the procedure below to scan the original.
Notes
• A document jam may occur if you pull or press down too hard on an original while it
scans.
• To prevent document jams when copying originals that contain holes, orient the original
so that the holes feed in last.
1. Orient the original face down, with one edge aligned with the original guide, and then evenly
insert the lead edge into the scanner. When the scanner detects the original, it will feed it a short
distance and stop briefly, then complete the scan automatically.
Notes
• Hold the original down flat with two hands (one on either side of the arrow shown in the
graphic) while it feeds into the starting position. Doing this helps prevent wrinkles that
may result in dark areas on the copy. The document may jam if you release it before it
stops feeding.
• If the document does not feed automatically, the Scan Start mode may be set to
[Manual Start]. In this case, press the <Start> button. For more information, refer to the
section on Scan Start.
• The original guide can be moved to the right to scan an oversized original, or an original
with hanging holes.
• If a problem occurs during scanning, an error message will appear on the touch screen.
Solve the problem as instructed in the message.
2. If the scanner is equipped with front return guides, the original will exit toward the front of the
machine. You may wish to guide the lead edge of the original as it travels toward you.