Xerox 1235/DX - Phaser Color Laser Printer, Руководство по расширенным функциям и устранению неисправностей

Страница: 21 / 144

Advanced Features and Troubleshooting Manual 5
Getting to Know Your Printer
Printer Features
Your printer has many special features that enable you to achieve the results you need for
your specific print job. Features vary according to the options installed on your printer.
This section will help you become familiar with your printer's features and capabilities.
Media Handling
Your printer has several media input sources and output destinations as described below.
Input Sources
■
The standard Multi-sheet Bypass Feeder (MBF) functions as either a single-sheet
manual-feed tray or a tray for up to 100 sheets of standard 20-lb. (75
g/m
2
) bond paper,
up to 80 standard or premium transparency sheets and a smaller number of sheets of
special media.
■
Tray 1 is the standard input tray that holds up to 530 sheets of 20-lb. (75
g/m
2
) bond
paper or 175 standard or premium transparencies.
■
Tray 2 is the optional input tray installed immediately below Tray 1. It holds up to
530 sheets of 20-lb. (75
g/m
2
) bond paper. Transparencies are not supported from this
tray.
■
Tray 3 is the optional input tray installed immediately below Tray 2. Like Tray 2, it
holds up to 530 sheets of 20-lb. (75
g/m
2
) bond paper. Transparencies are not
supported from this tray.
Trays 1, 2 and 3 all have paper-size sensing, low-paper sensing and tray-empty sensing.
Paper levels are indicated on a gauge visible at the front of the tray. When the level reaches
approximately 40 sheets, the
low paper
warning displays on the front panel.
The Multi-sheet Bypass Feeder (MBF) has tray-empty sensing, but not paper-size sensing.
Refer to
Loading Print Media
on page 13 for information on supported media and
instructions on loading the trays.
Output Destinations
■
The standard face-down bin (see Front View on page 2) holds up to 500 sheets and
receives prints face-down. It has bin full detection.
■
The face-up bin (see Rear View on page 3) holds up to 100 sheets and receives prints
face-up (at the rear of the printer) .
Note
When the rear door is open, all prints are diverted to the face-up bin.
Note
Face-up bin does not have bin full detection.