User Manual
Wildcat
Company confidential.
This document is the property of Xenics. It may not be reproduced
–
completely or partially
–
or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2020-UMN001
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R001
BE-3001 Leuven
Belgium
www.xenics.com
Date:
XF-104_03/20-12-2012
Page 49 of 58
Loading a user set
To load a user set, follow these steps:
1. Use
User set control
– Selector
to select one of the user set slots.
2.
User set control
– Slot info
will update to indicate whether the slot contains existing user
set data. Loading an empty user set will result in an error message.
3. Execute
User set control
– Load
to apply the selected user set configuration.
4.
User set control
– Current
will update to reflect the loaded user set.
Clearing a user set
To clear a user set, follow these steps:
1. Use
User set control
– Selector
to select one of the user set slots. Note that the
Factory
default
user set cannot be cleared.
5.
User set control
– Slot info
will update to indicate whether the slot contains existing user
set data.
6. Execute
User set control
– Clear
to clear the selected user set configuration. This
process is irreversible.
Default user set
The default user set defines how the camera will start up after a power cycle. To
automatically power up the camera with a certain configuration, save it as a user set and
select that user set in
User set control
– Default.
When using Xeneth, start the camera after a power cycle using the (
Camera memory)
option for
Calibration data
(see Chapter 2.3) to use the default user set.
