User Manual
Wildcat
Company confidential.
This document is the property of Xenics. It may not be reproduced
–
completely or partially
–
or passed to a third
party without written permission from Xenics.
Xenics nv
T +32 16 38 99 00
Doc Ref: ENG-2020-UMN001
Ambachtenlaan 44
F +32 16 38 99 01
Issue: R001
BE-3001 Leuven
Belgium
www.xenics.com
Date:
XF-104_03/20-12-2012
Page 14 of 58
Unified connector
Pin number
Function
1
Power supply
– (GND)
2
Power supply
– (GND)
3
Power
4
Power
5
Trigger in 1
6
Trigger in 2
7
Trigger out 1
8
Trigger out 2
9
Serial TXD
10
Serial RXD
Power supply (Pins 1, 2, 3, 4)
GND pins are common for power supply, trigger and serial communication. They are inter-
connected on the camera side.
The power pins are also connected with each other on the camera side.
The power supply should deliver 12 VDC ± 5% with a current compliance of minimum 2 A.
Trigger (Pins 1, 2, 5, 6, 7, 8)
Electrical characteristics
Trigger input
Digital output
Technology
LVCMOS - 3.3 V
LVCMOS - 3.3 V
Trigger low value
≤ 0.8 V
≤ 0.4 V
Trigger high value
≥ 2.4 V
≥ 2.9V
Minimum input
0 V
/
Maximum input
15 V
/
Input / output resistance
> 1
kΩ
100 Ω
Load resistance
/
≥ 1kΩ
Serial communication (Pins 1, 2, 9, 10)
The Serial communication is according to the RS-232 standard.
Also refer to the Xenics Serial Protocol document
1
in the \Documents\ folder on the USB
drive for more information on serial communication with Xenics cameras.
1
ENG-2011-ICD003 Xenics Serial Protocol
