Xcel-Arc VIPER CUT 30Mk II, Руководство по эксплуатации

Страница: 13 / 24

A
A
A
A
Amperage Control Knob
• Turn the knob to increase or decrease the desired value displayed on the display.
Cut Mode
Push the CUT MODE button to cycle through Cut Modes.
• Standard - Solid metal
• Perforated - Metal with gaps, such as mesh, fencing, etc.
2T/4T Torch Mode
Push the 2T/4T button to cycle through Torch Modes.
• 2T - Hold the torch trigger to initiate the arc, and release the trigger to end the cut.
• 4T - Press the torch trigger to initiate the arc, and press the trigger again to end the cut.
Air Test
• Hold down the button to initiate an air test. Release the button to end the test.
CONTROL PANEL OPERATION
13