Xcel-Arc VIPER CUT 30Mk II, Руководство по эксплуатации

Страница: 12 / 24

5
7 8
9
6
A
Connect the earth clamp to the work piece.
Place and hold the torch vertical at the edge of
the plate.
Pull the trigger to energise the arc. When the
cutting arc has cut through the edge of the
plate start moving evenly in the direction you
wish to cut.
To finish the cutting release the torch switch.
The air flow will continue for 10 seconds to cool
the torch head. Do not disconnect air until this
cooling period has been completed. Failure to
do this will result in torch head damage.
Set up cutting parameters (See page 13 for
in-depth setup).
SETUP FOR PLASMA CUTTING
12