Xcel-Arc VIPER CUT 30Mk II, Руководство по эксплуатации

Страница: 11 / 24

1
3 4
2
A A
ON
OFF
Connect the Earth Clamp to the dinse
connection, twist to lock in place.
Connect the air supply to the regulator located
at the rear of the machine. Set Air Pressure to
0.5MPA (75psi)
Connect the Plasma Torch into the Plasma
Torch Connection, and twist to tighten securely.
Turn the machine on.
WARNING: USE COMPRESSED AIR
ONLY WITH THIS MACHINE
SETUP FOR PLASMA CUTTING
11