X5368r-P3
User’s Manual Version 1.0
123
7.32
VoIP set sip silenceSuppression
7.32.1 Syntax
voip set sip silenceSuppression {enabled|disabled}
7.32.2 Description
This command enables or disables Silence Suppression.
Silence suppression controls the silence suppression
insertion in the voice data samples.
When silence suppression is enabled, silence is
‘transmitted’ as a special type of compact voice
sample. This is a much more efficient use of bandwidth,
instead of just sending normal voice
samples which contain nothing but silence.
7.32.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-27:voip set sip silenceSuppression CLI command
X5368r-P3
User’s Manual Version 1.0
124
7.33
VoIP set sip userdomain
7.33.1 Syntax
voip set sip userdomain <domain>
7.33.2 Description
This command is used to set the SIP user domain. The
domain can be:
• IP address - for example, 192.168.1.1
• IP Domain name - The domain name should be a FQDM
(Fully Qualified Domain name). For
example,
www.example.com
.
You would typically use this command if you wanted to set
a different domain name for the SIP
Proxy server. For example:
• Set the domain name for SIP users
www.example.com
.
Using the command, voip set sip
userdomain.
• Set the domain name for the SIP Proxy server:
www.proxy.example.com
. Using the command,
voip set sip regproxy.
7.33.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-28:voip set sip regproxy CLI command
7.33.4 Example
prompt> voip set sip userdomain 192.168.1.18
