X5368r-P3
User’s Manual Version 1.0
85
7
7
V
V
O
O
I
I
P
P
C
C
L
L
I
I
c
c
o
o
m
m
m
m
a
a
n
n
d
d
s
s
7.1 VoIP add callagent
7.1.1 Syntax
voip add callagent <name> <domain> [port <port>]
[vendor <vendor>]
Description
This command is used to configure MGCP on a Voice-IAD
system. The command adds an MGCP
call agent to an MGCP Voice network. An MGCP Call
Agent is used to establish and control VoIP
calls between Voice-IAD systems on the network. A
typical Voice network would have more than
one Call Agent that can be used by Voice-IAD systems.
There are many different types of MGCP Call agents
available from different vendors. When adding
a Call Agent you can specify the Call Agent you are using
(from a list of supported vendors). This
ensures that the Voice-IAD system can inter-operate
correctly with Call Agents which may provide
different implementations of parts of the MGCP standard.
Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 2: voip add mgcp callagent CLI command
Example
prompt> voip add callagent mgcp1 192.168.1.1
X5368r-P3
User’s Manual Version 1.0
86
7.2 VoIP clear callagents
7.2.1 Syntax
voip clear callagents
7.2.2 Description
This command clears all current MGCP Call Agents
configured on a Voice-IAD system. To delete
individual MGCP Call Agents, use the command
voip
delete callagent
.
7.2.3 Example
prompt> voip clear callagents
