X5368r-P3
User’s Manual Version 1.0
105
7.18
VoIP set mgcp domain
7.13.19.1 Syntax
voip set mgcp domain <domain>
7.13.19.2 Description
This command is used to identify the MGCP domain in
which the Voice-IAD system is situated.
For example, by default the MGCP call agent
configuration file entry for a phone connected to a
Voice-IAD system with IP address 192.168.88.25 would
be:
aaln/1@[192.168.88.25]
The domain name in this example is ‘[192.168.88.25]’.
If you wish to override this setting, you can use this
command to change the domain name, for
example gspn. The command:
voip set mgcp domain gspn
This will result in endpoints such as ‘aaln/1@gspn’
7.13.19.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-13:voip set mgcp domain CLI command
7.13.19.4 Example
prompt> voip set mgcp domain dom1
This will result in endpoints such as ‘aaln/1@dom1’.
X5368r-P3
User’s Manual Version 1.0
106
7.19
VoIP set mgcp eptypename
7.19.1 Syntax
voip set mgcp eptypename <eptypename>
7.19.2 Description
This command is used to configure the MGCP Endpoint
type name or
eptypename
.
For example, the MGCP call agent configuration file entry
for a phone connected to a Voice-IAD
system with IP address 192.168.88.25 would be:
aaln/1@[192.168.88.25]
In this example, the
eptypename
is ‘aaln’. This is also the
default setting.
7.19.3 Options
The following table gives the range of values for each
option which can be specified with this
command and a default value (if applicable):
Table 10-14:voip set mgcp eptypename CLI command
7.19.4 Example
prompt>
voip set mgcp eptypename bbln
