manualshive.com logo in svg

Xantrex XDC, Руководство по эксплуатации, Страница: 73 / 254

Поделиться
Скачать
Xantrex XDC Скачать руководство пользователя страница 73

Operation

Power Supply Operation

Release 3.0

71

To set Fold Protection:

Set

Shutdown

Recovery for

AC Off and

OTP

The Shutdown Recovery menu offers 2 options for AC Off (ACO) and 
Over-Temperature protection (OTP):

•

Auto-Recovery:

 With this method, the power supply returns to its normal 

operating state once the alarm condition no longer exists. For example, if there 

was an over-temperature alarm and the protection was set to auto-recovery, the 

power supply would return to its normal operating state once the temperature 

was reduced below the alarm level.

•

Latched:

 With this method, the power supply remains in Shutdown state until 

the operator manually clears the protection level and manually turns the output 

back on.

You can set either or both the OTP and AC Off to Auto-Recovery or Latched.

Step # Do This

You Will See

1

OVP SET 0V

2

 Press repeatedly.

Fold SD Mode

3

4

Use the arrow keys or the numeric 
keypad to select the value: None, CC, 
CV, CP

Fold on ####

5

6

Use the arrow keys or the numeric 
keypad to select the delay time.

Delay 0s

7

This setting is saved.

PROT SET

ALARMS

PROT SET

ALARMS

ENTER

ENTER

ENTER

Содержание XDC































































































































































































































































Отзывы:

Нет отзывов