Installation
975-0126-01-01
13
Unpacking and Inspecting the Inverter/Charger
Materials List
Contents
The following materials are in the shipping box:
•
RS2000 Sine Wave Inverter/Charger
•
Battery terminals covers (one red, one black) and four screws
•
Two flat washers
•
Two lock washers
•
Two 3/8" bolts
•
Battery temperature sensor
•
RS2000 Sine Wave Inverter/Charger Installation Guide
(not shown)
•
RS2000 Sine Wave Inverter/Charger Operation Guide
(not shown)
To unpack and inspect:
1. Unpack the unit and check the materials list. If anything is missing from the
shipping box, contact Xantrex Customer Service. See “Contact Information”
on page iii.
2. Record the serial number of the RS2000 and other purchase information in the
“Warranty and Product Information” section of the
RS2000 Sine Wave
Inverter/Charger Operation Guide
. You will be asked for this product
information if you need to call Xantrex Customer Service.
WARNING: Heavy load
The RS2000 Sine Wave Inverter/Charger weighs approximately 67 lbs (30 kg)
.
The unit is
too heavy for one person to safely lift and mount. Xantrex recommends that two people
lift and mount the unit. Always use proper lifting techniques during installation to prevent
personal injury.
Figure 3
RS2000 Hardware Materials as Shipped
Содержание RS2000
