Xantrex Freedom X 1200 120VAC, Руководство пользователя

Страница: 55 / 78

975-0767-01-01 41
Freedom X Inverter Configuration
To change the power save timer setting:
By default the operational mode is set to 25 hours (“  ||  ”).
1. Press and hold the button for three seconds.
2. Press the Scroll button until the left LCD Screen flashes
“  ||” intermittently.
3. Press the button to select the setting.
The right LCD Screen will display the current setting “||  ”
and then begin to flash intermittently.
 to  When the load is 50 watts or under, this
value represents the number of hours
inverter operation is going to continue
before it is automatically turned off to
preserve the battery.
 Power save time setting is OFF
4. Continue pressing the Scroll button to cycle through the
settings until you reach the desired setting.
5. Press the button to make the setting permanent.

or

Press the button to exit.
To change the load sensing feature:
By default the operational mode is set to disabled (“  ||  ”).
1. Press and hold the button for three seconds.
2. Press the Scroll button until the left LCD Screen flashes
“  ||” intermittently.
3. Press the button to select the setting.
The right LCD Screen will display the current setting “||  ”
and then begin to flash intermittently.
 Enabled
 Disabled
4. Continue pressing the Scroll button to cycle through the
settings until you reach the desired setting.
5. Press the button to make the setting permanent.

or

Press the button to exit.
Freedom X Owners Guide.book Page 41 Wednesday, May 11, 2016 10:32 AM