Xantrex Freedom X 1200 120VAC, Руководство пользователя

Страница: 18 / 78

4 Freedom X Owner’s Guide
Features
Table 1 lists the default settings for the Freedom X system.
You may record your settings in the right-hand column after you
have configured the Freedom X.
Table 1 Freedom X Default Values
Item Default Setting Your Setting
Power Save Time

- 25 hours
Power Save (Load Sensing)  - Disabled
LBCO Voltage Setting  - 10.5 volts
LBCO Shutdown Delay  - 300 seconds
Ignition Control  - Off
Transfer Mode  - Appliance
Output Frequency  - 60 Hz
Alarm Buzzer  - On
AC Panel
2
1
3
9
4
8
5 6
7
10
Feature Description
1
Location of GFCI
a
a. Designed to fit GFCI device: Eaton/Cooper SGF15W
receptacles (customer-supplied GFCI) .
2 ACC input terminal for connecting ignition control wiring.
3 RJ12 port allows you to connect an accessory remote control device.
4 Mounting flanges on both sides allow you to mount the inverter permanently
on deck or on a wall.
5 Ignition Control Switch (ACC) for connecting [ON (|)] and disconnecting
[OFF (O)] the ignition signal.
6 Reset button for 15 A supplementary protector protects the customer-
supplied GFCI. Press to recover from an overload condition.
7 AC knockout can be removed for routing AC output wiring.
8 Grounding stud with attached nut provides a ground path for the Freedom X
chassis to the DC system ground.
9 AC knockout can be removed for routing AC input wiring.
10 Captive nut panel screw holds the AC compartment cover in place.
Freedom X Owners Guide.book Page 4 Wednesday, May 11, 2016 10:32 AM