Xantrex Freedom X 1200 120VAC, Руководство пользователя

Страница: 16 / 78

2 Freedom X Owner’s Guide
Introduction
Key Features
Power for Most Appliances The Freedom X inverter provides up
to 1200 watts of continuous utility grade, sine wave power derived
from a battery bank. It is designed to handle loads such as
microwave ovens, TVs, DVD/Blu-ray players, and power tools. In
addition, the Freedom X’s high-surge capability lets you handle
many hard-to-start loads, including full size residential refrigerators.
The built-in transfer switch automatically transfers between inverter
power and shore power from recreational facilities such as boat
docks or campsites to ensure power is always available.
Back-up Capability If incoming shore power is interrupted by
external events like brownouts, the Freedom X automatically
becomes an independent power source
a
that supplies utility grade
AC power to your loads.
Comprehensive Protection The Freedom X’s built-in protection
features safeguard your batteries (from unnecessary drain) such as
the low battery voltage alarm and shutdown and protect equipment
such as a configurable AC transfer speed.
Selectable Low Battery Shutdown The low battery shutdown
for the inverter can be manually selected by the user from 10.5 to
12.1 VDC.
Low Voltage Shutdown Delay Timer Configurable from 1 to
300 seconds to reduce an unnecessary shutdown of inverter
operation such as during cranking or other brief but heavy discharge
of battery.
Inverter Power Save The Freedom X can be programmed to
automatically turn off after 1 to 25 hours of continued operation of
loads that are under 50 watts. It is designed, with LBCO (low
battery cutout), to prevent the battery from deep discharge.
Low Power Consumption When the inverter is power saving and
the Freedom X is inverting without a load, it draws less than
0.6 amp of current from the battery (or battery bank). This feature
allows the unit to operate without draining too much stored energy.
Configurable AC Transfer Speed The Freedom X allows two
speed settings for the AC transfer from AC Mode to Battery Mode
and vice versa which avoids nuisance resetting of appliances. The
normal transfer rate is for common appliances and the faster transfer
rate is designed for more sensitive digital equipment like a desktop
computer.
a.Assuming the inverter is connected to a battery source with an adequate charge at
the time of the power interruption.
Freedom X Owners Guide.book Page 2 Wednesday, May 11, 2016 10:32 AM