32
Freedom SW 230V Owner’s Guide
Operating the Freedom SW with the SCP
Table 4
Device Setup Screen Operating States (Modes)
State (Mode)
Displayed When...
Invert
The Freedom SW 230V is supplying power to loads by inverting
power from the batteries. AC input from the utility or generator is
absent or out of nominal range.
Qualifying AC
The Freedom SW 230V is determining if AC input is within a usable
voltage and frequency range.
Qualifying AC
is also displayed
when the Freedom SW 230V is awaiting application of AC power or
a command to enable invert mode.
Charging
The Freedom SW 230V is charging the batteries from qualified AC
input from the utility grid (shore power) or a generator. The charge
state is in transition to either bulk, absorption, float, or equalize. AC
input is also passed through to the load while charging.
Bulk
The Freedom SW 230V is bulk charging the batteries from qualified
AC input from the utility grid (shore power) or a generator. AC
input is also passed through to the load while bulk charging.
Absorption
The Freedom SW 230V is absorption charging the batteries from
qualified AC input from the utility grid (shore power) or a generator.
AC input is also passed through to the load while absorption
charging.
ABS Finish
One Freedom SW 230V unit has completed the absorption stage and
is waiting for other Freedom SW 230Vs in the system to complete
absorption. This status can occur only when there is another
Freedom SW 230V also charging the battery.
Float
The Freedom SW 230V is float charging the batteries from qualified
AC input from the utility grid (shore power) or a generator. The
Freedom SW 230V is set for three-stage charging. AC input is also
passed through to the load while float charging.
Fault
The Freedom SW 230V has an active fault. The Fault/Warning light
on the Xanbus SCP is on.
GenSup Mode
There is AC input from the generator, and the Freedom SW 230V is
supporting the generator by supplying additional power to the
critical loads. See “Generator Support” on page 57.
Search
Search mode is enabled and the Freedom SW 230V is standing by,
waiting to begin inverting. See “Changing Configurable Settings
From The Device Setup Menu Screen” on page 37.
Passthru
The AC connected to the ACIn input is passing directly through the
Freedom SW 230V to the loads. The batteries are not being charged
in this state.
Equalize
Equalization has been turned on and the Freedom SW 230V is
equalizing the batteries after completing a full charge cycle.
Table 4
Device Setup Screen Operating States (Modes)
State (Mode)
Displayed When...
FSW 230V Owners Guide.book Page 32 Tuesday, August 7, 2018 9:38 AM
Содержание Freedom SW 230V 815-3524-02
