Xantrex Freedom SW 230V 815-3524-02, Руководство пользователя, Страница: 33 / 104

975-0696-01-01 19
Operating the Freedom SW with the SCP
Using the Xanbus SCP
As shown in Figure 8, the SCP has these important features:
Display screen System information is shown on the display
screen with an adjustable backlight.
Indicator lights Four indicator lights on the front panel indicate
the operating status of the Xanbus system.
Push buttons Four push buttons allow you to select device menus
and change or display settings. The red STBY/ON Fault Clear
button toggles the SCP and Xanbus-enabled devices between
Operating mode and Power Save mode, if held down for more than
three seconds. The button can also be used to clear any active faults
or warnings by momentarily depressing the button.
System Control Panel
The Xanbus System Control Panel (SCP) provides configuration
and monitoring capability for all Xanbus-enabled devices on the
network. All changes to the configuration of the Freedom SW 230V
are made with the SCP.
The front panel of the Freedom SW 230V provides limited control,
including reset; charger enable and disable; and inverter enable and
disable.
Enabling a function When a function is enabled, it is allowed to
occur but other conditions may have to be met before the function is
activated or turned on. For example, the charger function on the
Freedom SW 230V may be enabled, but it will not charge unless
qualified AC power is present.
Disabling a function When a function is disabled, it is not
allowed to occur and if it is occurring, it is terminated. Regardless
of other conditions, the function will not be activated. For example,
even if AC power is present, if the charger is disabled, the unit will
not charge.
NOTE : All functions on the front panel can also be controlled from
the SCP.
FSW 230V Owners Guide.book Page 19 Tuesday, August 7, 2018 9:38 AM