X-Rite 891, Руководство по эксплуатации

Страница: 54 / 80

S E C T I O N S I X
6-2
4. Select internegative film by pressing key ll or key lll (4114). Select 6011
if your are using film similar to Kodak 6011 or interneg film 4112. Select
4114 if you are using film similar to Kodak 4114.
READ Ineg Step1
Typ2 4114 other
5. Insert Type 2 strip into the 35mm slot until it comes to rest against the
drive rollers.
10 20
30
10
20 30
6. After strip measurement, the display screen indicates which step pair is
used on subsequent calculations.
•
Pressing key l (view) allows viewing of density difference numbers.
Refer to Viewing Density Difference later in this section.
•
Pressing key ll (+) increments step number and key lll (-) decrements
step number. Refer to Viewing Individual Steps later in this section.
•
Pressing key llll (auto) performs filter pack and exposure calculations
automatically. Refer to Auto Exposure and Filter Pack Compensation
later in this section.
STEP PAIR= 3, 13
view +step– auto
NOTE: If the strip is severely over exposed, a warning message
STRIP TOO
FAR OVEREXPOSED
appears briefly. You are then allowed to view the
individual steps using [+] or [-] step keys. However, the View and Auto
functions are not available. If this occurs, reduce your exposure by three or
four times and try another strip.
1.2” (30.5mm) Leader
Step 1
Step 2