X-Rite 891, Руководство по эксплуатации

Страница: 38 / 80

S E C T I O N F O U R
4-4
9. The instrument display screen indicates that the new reference is entered
and allows you to view the data. If you want to view the measurement
data, press key
llll (yes) and refer to Viewing Reference Data later in this
section. If you do not want to view the data, press
key
lll (no) to return instrument screen to Channel menu.
NEW REF ENTERED!
VIEW AIMS no yes
Correction Factor Procedure
NOTE: The correction factor procedure does not apply when automatic
correction factors (ACF) are used.
Typically, correction factor numbers are supplied with your new reference
strips. Correction factors compensate for the variability that can occur during
strip manufacturing.
1. From the Need Correction Factors screen, press key llll (yes).
NEED CORRECTION
FACTORS? no yes
2. Enter correction factors for all required fields measured. Press key l
(D-min, etc.) to page through available fields. Note, pressing key l an
additional time after the last field displays advances the screen to the
Load screen.
•
Press key llll (
→
) to move the cursor to desired location. Press key ll (
↑
)
to increase value; press key lll (
↓
) to decrease value.
0.00 0.00 0.00
D—min
↑ ↓
→
—
•
Press key l (review) to return to the correction factor fields. Press llll
(continue) to exit correction factors and continue with the reference entry
procedure.
C—FACTORS LOADED
review continue
Cursor