X-Rite 891, Руководство по эксплуатации

Страница: 37 / 80

E S T A B L I S H I N G R E F E R E N C E ( A I M ) V A L U E S
4-3
•
If additional strips are required (maximum of eight), press key llll (yes)
and repeat measurement sequence with new reference strip.
If averaging is not required, press key
lll (no) and advance to Batch Code
Entry screen.
AVG IN A 2nd REF
STRIP? no yes
•
The instrument screen momentarily displays a message asking you to
enter a batch code number.
PLEASE ENTER REF
BATCH CODE NO.
6. The batch code consists of a combination of numbers and letters at a
maximum of six characters. Press key
l
(
→
) to move the cursor to desired
location. Press key
ll
(
↑
) to increment character; press key
lll
(
↓
) to
decrement character. Press key
llll
(save) to save batch number to
reference strip and advance to next screen.
BATCH NO. 123456
save
↑
↓
→
—
7. If corrections factor adjustments are required, press key llll (yes) and
refer to Correction Factor Entry procedure later in this section. If
correction factor adjustments are not required, press key
lll (no) to
advance to next screen. Note, the correction factor screen does not
appear for printer balance references, or when automatic correction
factors (ACF) are used.
NEED CORRECTION
FACTORS? no yes
8. If reference crossover function is required, press key
llll
(yes) and refer
to Reference Crossover procedure later in this section. If reference
crossover is not required, press key
lll (no) to advance to next screen.
Note, the reference crossover screen does not appear for printer balance
references.
DO REF CROSSOVER
FUNCTION? no yes
Cursor