X-Rite 891, Руководство по эксплуатации

Страница: 36 / 80

S E C T I O N F O U R
4-2
FUNCTION MENU
p4 view xmit ref
2. Press key I (pap, etc.) located on Select Ref Chan screen to select
reference channel. After selecting channel, press key llll (go>) to
advance to the measurement screen.
SELECT REF CHAN:
pap go
>
3. Press key llll (other) to select reference format.
READ k:RA—4 ALL
AT
<
18 18
>
other
4. Measure strip
•
For paper strips, adjust the paper guides according to the number
displayed on the screen. If multiple pass, note what color is to be
measured first. Insert strip until it comes to rest against the drive rollers.
•
For film strips, note insertion direction and insert strip into the 35mm
slot until it comes to rest against the drive rollers.
•
For printer balance strips, not insert direction and center bull’s-eye over
middle diamond. Slide paper guides next to strip and insert strip until it
comes to rest against the drive rollers.
20 10 10 30
20 30
•
The densitometer indicates that processing is taking place and the
measured “pass” status. If a paper strip is measured that has multiple
passes, the display will indicate the pass to insert.
PROCESSING...
PASS #1 of 1 OK!
5. After the first reference strip measurement is complete, the display
screen asks if you want to average in a second reference strip.
NOTE: REFERENCE MISMATCH appears in the display if the reference
strip measured does not match the format previously measured. Press key llll
(yes) to continue, or press key lll (no) to exit reference function.
Paper Guide
35mm Slot
Center Diamond
Paper Guide