X-Rite 891, Руководство по эксплуатации, Страница: 41 / 80

E S T A B L I S H I N G R E F E R E N C E ( A I M ) V A L U E S
4-7
NOTE:
VIEW LAST
displays after pressing key ll (view) if the last strip
measured is a different format than the reference previously measured in that
channel. This allows you to measure different strip formats and view data
without affecting the channel’s memory of the last 16 strips measured. Press
key
llll
(go>) to view strip data. Press key
l
(chan) to go to next view menu.
2. Press key
l
(chan) to select reference channel for viewing. After selecting
channel, press key
ll
(ref) to indicating reference data for viewing (ref
will appear is upper-case when selected).
VIEW pap k:RA—4
chan ref dev go
>
3. Press key llll (go>) to view reference data.
VIEW pap k:RA—4
chan REF aim go
>
NOTE:
NO REF INSTALLED
appears in the display if no reference is
available in the selected channel.
4. Data is viewed in the same manner as discussed on the previous page.
10:28
<
4/15
>
0.00 0.00 0.00
D—min
Red Green Blue
5. After viewing data, continue to press key
l
(D-min) until the Exit screen
appears, then press key llll (yes) to exit.