WXLINE Strike Guard, Руководство пользователя

Страница: 23 / 37

SECTION 7
LIGHTNING WARNING SYSTEM QUICK
REFERENCE INSTALLATION GUIDE AND
CHECKLIST
This document is a supplement to more comprehensive Strike Guard User’s Guides. Please
refer to the applicable Strike Guard documents for detailed information and instructions.
NOTE
Perform Step 1 through Step 8 in an indoor environment to
ensure the proper function of all system components before
proceeding with the permanent installation.

Check boxes after completing steps.

STEP 1 Unpack all Strike Guard components and lay them out in a suitable area.
Compare the components received against the items listed on the Wxline,
LLC Quality Control Check / Warranty Registration form. Immediately
notify Wxline of any discrepancies in items ordered and items received.
Complete the appropriate fields on the form and fax it to Wxline (Fax: 520-
615-0030).

STEP 2 Remove the front cover from the LDR by taking off the four brass
thumbscrews. Handle the cover carefully and place it face down (board
up) upon a soft surface. In the designated office environment, level and
affix the back plate of the LDR against a wall with the serial number label
facing upwards. Locate the LDR as close to equipment to be controlled
as possible to minimize the length of control and bond wiring.

STEP 3 Assemble the power supply for the LDR. Connect the output connector of
the power supply to the power input connector (J200) of the LDR. Ensure
that the LDR is powered from the same AC power source as the
equipment that the LDR will control. Plug the power supply into a surge
protected power strip.
NOTE
The plastic fiber-optic cable must be handled with care to prevent
kinking or bending. Kinks and sharp bends in the fiber may
prevent the system from working. Replace fiber-optic cable that
is kinked or sharply bent. Use light pulling forces on the fiber and
keep bend radii as large as possible. Do not step on the fiber and
do not lay the fiber directly on a hot roof surface. Non-metallic
electrical conduit is recommended for fiber protection.
Strike Guard Lightning Warning System
23
DEC 2013