WXLINE Strike Guard, Руководство пользователя

Страница: 30 / 37


Since it may take up to 60 minutes for the Sensor to perform the next self-
test resulting in the indications mentioned above, it may speed the
installation process to trigger a Sensor self-test by turning the Sensor
upside down (glass diffuser pointing down), waiting ten seconds or more,
and then returning the Sensor to the upright position. This process of
turning the Sensor off and then on causes the Sensor to send a self-test
message to the LDR and then to the Converter connected to the
computer.
The Lightning Warning System must be fully installed and working and the
Lightning Data Receiver must be powered and ON in order to function as
a fiber-optic repeater for Strike View.
No Lightning Detected Mode remains in effect provided that no data is
sent from the Strike Guard Receiver except routine Sensor Status
information. If lightning data is sent from the Strike Guard Receiver to the
computer, Strike View Server Mode changes to Caution, Warning, or
Alarm Mode based on the proximity of the lightning flash detected
.
Strike Guard Lightning Warning System
30
DEC 2013