Würth 0701 225 0, Перевод оригинальной инструкции по эксплуатации

Страница: 25 / 292

25
Every 250 operating hours
▸
Clean or replace the air filter [13] (Fig. VII) .
Every 500 operating hours
▸
Completely drain the oil at the oil drainage screw
plug [9] and replace.
After 1000 operating hours
▸
Arrange for inspection in a specialist workshop.
Note
The service life of the device will be
significantly extended by adhering to the
maintenance intervals and performing
the scheduled maintenance work.
Storage
Attention!
¾
Do not store the device outdoors or in a damp
environment.
¾
Frost (< 5 °C) will destroy the device and
accessories, as these always contain water. If
there is a risk of frost, dismantle the device and
accessories and store protected against frost.
▸
Switch off the device and unplug.
▸
Depressurise the pressure tank and all connected
air tools.
▸
Drain the pressure tank condensation at the
condensate drain
[7]
.
▸
Store the device so that it cannot be started up by
unauthorised persons.
▸
Do not lay the device on the side. Oil may
escape!
Warranty
We provide a warranty for this Würth device
from the date of purchase and in accordance
with the legal/country-specific regulations (proof
of purchase through invoice or delivery note).
Damage that has occurred will be corrected either
by replacement or by repair. Damage caused by
improper handling is not covered by the warranty.
Claims under warranty can only be accepted if
the device is returned fully assembled to a Würth
agency, your Würth sales representative or an
authorised Würth customer service workshop. Sub-
ject to technical changes without prior notice.
We accept no liability for printing errors.
Environmental instructions
The condensation from the pressure tank and the
filter pressure reducer contains oil residues and/or
contaminants that are harmful for the environment.
Dispose of the condensation water at appropriate
collection points.
Dispose of the used oil from the compressor in an
environmentally responsible manner at appropriate
collection points.
Do not throw the device away with
normal domestic waste. Dispose of
the device via an approved waste
disposal company or via your local
authority waste disposal facility.
Observe the currently valid regula-
tions. In case of doubt, contact your
waste disposal facility. Dispose of all packaging in
an environmentally compatible manner.
Accessories and spare parts
If in spite of careful manufacturing and test proce-
dures, the device becomes faulty, a repair by Würth
masterService should be arranged. With any
enquiries or spare parts orders, always quote the
article number as given on the device type plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.