wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 51 / 102

OxiTop
®
Control OC 110 Operating mode: Pressure p
ba31116e05 07/2014
51
For the menu items - Show sample , - Erase sample -

list and - Call
up data refer to the corresponding paragraphs in section 5 O
PERATING
MODE
: BOD S
TANDARD
/ BOD R
OUTINE
, page 23.
7.6 Calling up momentary values
With this function you can call up and store the momentary pressure
value of a sample. The controller can store up to 10 momentary values
per sample. They appear as vertical lines on the curve in the evalua-
tion.
According to the sample selected, one of the two following
submenus appears.
Finished sample Current sample
The header line contains:

Sample number

ID number (e.g. I001)

Type and run duration
of the selected sample.
RUN/ENTER
The date and time must not be changed in the controller between
the start and end of a sample so the momentary values can be cor-
rectly stored.
SAMPLE STATUS TYPE (sam-
ple management):
Use <

><

> to select a sam-
ple.
A list with menu items for the
sample appears.
RUN/ENTER