wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 42 / 102

Operating mode: BOD Special OxiTop
®
Control OC 110
42
ba31116e05 07/2014
In the SELECT CALCULATION menu you can select one parameter
out of bottle volume,
filling volume and measuring range to be calculated by the controller
based on the other parameters. Enter the respective other parameters
using
<

><

> or confirm the presettings using <RUN/ENTER> .
When doing this the parameter to be calculated is changed simultane-
ously.
Example: Change parameters to:

Filling volume of the sample to be calculated by the controller,

Bottle volume 900 ml, dilution 1 + 1, measuring range 2000 mg/l.
Altitude 500 m -698 m to 5572 m (setting: see sec-
tion 9 GLP/TOOLS, page 57)
Parameters Default setting Admissible setting range
With <

><

> select the
parameter the controller will
calculate.
The controller stores the set-
tings.
Preselected
in the delivery state:
-
Measuring RANGE .
- Reset parameters resets
the settings to the delivery
state.
After confirming, the display
shows the values last set up
for bottle volume, filling vol-
ume of the sample, dilution
(these can be changed), and
the measuring range that the
controller calculated from
these.
# marks the parameter calcu-
lated by the controller.
RUN/ENTER
RUN/ENTER
SELECT CALCULATION menu:
Select the - FILLING volume
menu item with <

><

>