wtw OxiTop Control OC 110, Руководство по эксплуатации

Страница: 34 / 102

Operating mode: BOD Standard / BOD Routine OxiTop
®
Control OC 110
34
ba31116e05 07/2014
After confirmation, the display
message shown here appears.
Three displays are then possible:
Case 1 The sample is still running and
individual measuring heads of
the sample are not attainable.
Case 2 The run duration of the sample
has ended and the finished, all
data of the attainable measuring
heads have been transferred.
then
- Erase :
Removes missing measuring
heads from the data stock. The
completed sample is given the
“finished” status.
- Back :
Jumps back to the previous
menu.
Abort using a function key: The
stopped sample is not declared
as “finished”.
Case 3: No measuring head of a sample
is attainable.
(In the
BOD Routine operating
mode: The relevant measuring
head is not attainable).
then
- Erase :
Removes a sample from the
data stock.
- Back :
Jumps back to the previous
menu.
- Show

:
As in - Show sample , but selectively for missing measuring
heads (identification option if only the sender of the measuring
head is defective. Otherwise, see the section 12 W
HAT TO DO
IF
..., page 87)
RUN/ENTER
RUN/ENTER
RUN/ENTER