wtw Ox i340i, Руководство по эксплуатации

Страница: 29 / 61

Oxi 330i/340i Operation
29 ba52306e04 03/2008
Note
The AutoStore function is interrupted if you start other functions, e.g. output
the data storage.
After the function is finished, the AutoStore function is continued. By this,
however, temporal gaps in the recording of the measured values will occur.
Switching off
AutoStore
Switch AutoStore off by:
z
setting the save interval (Int 1) to OFF, or
z
switching the measuring instrument off and then on again.
5 As soon as all of the 800 storage locations are occupied,
AutoStore is terminated (Int 1 = OFF).
If there are not enough storage locations available for your measure-
ments:
– Output and backup the data storage (see page 30) and
– clear the memory (see page 34).
6 Confirm with <RUN/ENTER> .
The prompt for the ID number appears on the display.
7 Set the required ID number with <
▲
> <
▼
> .
8 Confirm with <RUN/ENTER> .
The instrument switches to the Oxi measuring mode and starts the
measuring and saving process.
AutoStore flashes on the display.
e r F
9 9 9
S
1
LoBat
Tref25
nLF
/
K %
RCL
Sal
°
AR
TP
C
M
m
%
mg/l
cm
S/
cm
cm 1/
° F
ARng
Cal Lin
Tref20
Sal
TDS
mbar
O UpH
mV/pH
AutoCal DIN
AutoCal TEC
Time Baud
Day.Month No.
Year
1
Store Auto
Ident