wtw MIQ/CHV, Руководство по эксплуатации

Страница: 26 / 38

Installation IQ S
ENSOR
N
ET
MIQ/CHV
3 - 16
3.6 Function check
General instructions After connecting the valve control line, check that the valve triggers cor-
rectly. This check is also suitable for the troubleshooting of malfunc-
tions.
A yellow LED (Fig. 3-15) is located on the board for indicating the status
of the valve. It lights up when the valve is open.
Fig. 3-15 Pilot LED on the board
5 Feed the line through the cable gland in the module housing.
6 Connect the wires to the terminal strip.
7 Loosen the coupling ring (pos. 3 in Fig. 3-14).
8 Perform the function check according to section 3.6.
9 Close the module.
LED