wtw MIQ/CHV, Руководство по эксплуатации

Страница: 25 / 38

IQ S
ENSOR
N
ET
MIQ/CHV Installation
3 - 15
Tools
l
Cable stripping knife
l
Wire stripper
l
Phillips screw driver
l
Small screw driver
Warning
Danger of injury from lines that are under pressure. The compressed
air glands in the housing may only be opened by a service technician
authorized by WTW.
Attention
Danger of burning on a hot resistor. The resistor can heat up to 80 °C
during operation. Do not touch the resistor.
Connecting control
lines to the terminal
strip
Fig. 3-14 Clamping termination for the valve control line
1 Open the module.
2 Open the left dummy gland.
3 Screw the cable gland (pos. 1 in Fig. 3-14) with the sealing ring
(pos. 2) into the module housing.
4 Loosen the coupling ring (pos. 3 in Fig. 3-14).