wtw MIQ/CHV, Руководство по эксплуатации

Страница: 21 / 38

IQ S
ENSOR
N
ET
MIQ/CHV Installation
3 - 11
Mounting the module
under the sun shield
Fig. 3-10 Mounting the module on the SSH/IQ sun shield
2 Remove the two screws (pos. 5 in Fig. 3-9) and swing open the
module lid.
3 Insert the cheese-head screws (pos. 6 in Fig. 3-9) with the
plastic washers in the drilled mounting holes and loosely screw
in the ISO blind nuts (pos. 7).
4 Position the module on the sun shield and fix it into place with
the two screws (pos. 6 in Fig. 3-9).
5 Close the module lid and fix it in place with the two countersunk
screws (pos. 5 in Fig. 3-9).