wtw MIQ/CHV, Руководство по эксплуатации

Страница: 18 / 38

Installation IQ S
ENSOR
N
ET
MIQ/CHV
3 - 8
Fig. 3-7 Connecting the cables to the module
4 Screw the cable gland (pos. 1 in Fig. 3-7) with the sealing ring
(pos. 2) into the module housing.
5 Loosen the coupling ring (pos. 3 in Fig. 3-7).
6 Feed the cable through the cable gland into the module hous-
ing.
7 Connect the cable ends to the terminal strip. While doing so,
look out for the designations of the terminals (red / shield /
green).
8 Loosen the coupling ring (pos. 3 in Fig. 3-7).
9 Close the module.
SENSORNET 2
SENSORNET 1
SNCIQ
SNCIQ/UG
1
3
2