wtw MIQ/CHV, Руководство по эксплуатации

Страница: 20 / 38

Installation IQ S
ENSOR
N
ET
MIQ/CHV
3 - 10
3.4.4 Mounting on a mounting stand with the SSH/IQ sun shield
Materials required
l
SSH/IQ sun shield (see chapter 7 A
CCESSORIES AND OPTIONS
).
Tools
l
4 mm set screw wrench
l
Phillips screw driver.
Mounting the sun shield
on a mounting stand
Fig. 3-8 Mounting the SSH/IQ sun shield on a mounting stand
Premounting the ISO
blind nuts
Fig. 3-9 Mounting the sun shield: Premounting the ISO blind nuts
1 Screw the sun shield (pos. 1 in Fig. 3-8) with the four hexsock-
et head screws (pos. 2), the washers (pos. 3) and the clamps
(pos. 4) at the required height on the mounting stand from the
back.
2
3
4
1
7
6
5