wtw MIQ/CHV, Руководство по эксплуатации

Страница: 12 / 38

Installation IQ S
ENSOR
N
ET
MIQ/CHV
3 - 2
A stack may consist of up to three modules ( e.g. one power supply
module and two MIQ/CHV modules). Further MIQ/CHV modules can
be connected via the SENSORNET module connections with the aid of
IQ S
ENSOR
N
ET
cable (see section 3.3.2 D
ISTRIBUTED MOUNTING
).
Attention
Always place the power supply module at the back of the stack.
Materials required
(contained in the scope
of delivery)
l
2 x ISO blind nuts M4
l
2 x cheese-head screws M4x16 with plastic washer
l
1 x contact base with two plastic tapping screws.
Tools
l
Phillips screw driver.
Preparing the stack
mounting
Fig. 3-1 Preparing modules for stack mounting
1 Remove the covers from the drilled mounting holes (pos. 1 and
3 in Fig. 3-1).
2 Remove the contact cover (pos. 2).
3 Pull off the adhesive label (pos. 4).
Bei
Stapelm
ontag
e Aufkleb
er
entfe
rnen
und
Kont
aktträg
er
montie
ren
For
stack
mounting
rem
ove
lab
el
and
inst
all con
tact
carrier
1 3
2 4
MIQ/CHV MIQ/CHV
module